This 20ft refrigerated container, commonly referred to as a reefer, begins as an ISO-certified cargo unit previously used in cold chain transport. The factory-installed Carrier refrigeration unit is mounted to the front wall. The unit has undergone a pre-trip inspection to verify basic functionality including compressor operation, airflow, and temperature control.
The container body is constructed from 14-gauge Corten steel with insulated wall panels. Polyurethane foam insulation is factory-sealed within the walls, floor, and ceiling. The floor includes integrated T-slot channels for air circulation beneath stored goods. The refrigeration unit draws power from an external electrical source and requires connection by a qualified technician.
The cargo doors are located at the rear of the container and measure 7ft 5in in width by 7ft 3in in height. Door gaskets are intact to maintain interior temperature separation. The container includes a data plate with manufacturer specifications including voltage, amperage, and refrigerant type.
As a used unit, the container may show signs of previous cargo service including surface scratches, minor dents, or small areas of surface rust on exterior surfaces. All structural components including floor, roof, corner castings, and door frames remain intact and functional.
Technical Specifications
- Container Type: ISO standard refrigerated (reefer)
- External Length: 20ft
- External Width: 8ft
- External Height: 8ft 6in
- Internal Length: approximately 18ft 10in
- Internal Width: 7ft 5in
- Internal Height: 7ft 2in
- Internal Volume: approximately 28 cubic meters
- Refrigeration Unit: Carrier, factory-installed
- Temperature Range: -30°C to +30°C
- Temperature Accuracy: within ±0.5°C under stable conditions
- Power Requirement: 440V AC, three-phase (verify on data plate)
- Insulation: Polyurethane foam
- Pre-Trip Inspection: Completed
- Condition: Wind and watertight
- Cargo Door Opening Width: 7ft 5in
- Cargo Door Opening Height: 7ft 3in
- Tare Weight: approximately 6,800 lbs
- Floor Material: Aluminum T-slot
- Exterior Material: Corten steel
Intended Use
Suitable for temperature-controlled transport or stationary storage of perishable goods including produce, dairy, beverages, seafood, and floral products. Designed for ground-level placement on compacted gravel, concrete pad, or level ground when used as stationary storage. Electrical system requires connection to an external power source by a licensed electrician. Not certified for pharmaceutical or medical storage unless additional validation and temperature mapping are completed by the purchaser. Not intended for residential habitation.
Package Includes
Pre-trip inspection report
One used 20ft refrigerated shipping container
One Carrier refrigeration unit
One pair of cargo doors with locking bars
Reviews
There are no reviews yet.