This 20ft shipping container has been previously used in cargo transport and is modified with a side-mounted roller shutter door. The roller shutter door operates on a spring-assisted mechanism and slides vertically into an overhead housing. The door opening measures approximately 7ft in width by 6ft in height. The roller shutter door includes a locking mechanism with a hasp for padlock application.
The roller shutter door design requires no external swing space, allowing placement in narrow or confined areas where hinged doors cannot fully open.
The original cargo doors at one end remain fully operational, measuring 7ft 5in in width by 7ft 3in in height. Door locking bars operate with a standard locking mechanism.
The container body is constructed from 14-gauge Corten steel with corrugated sidewalls. As a used unit, the container shows signs of previous cargo service including surface scratches, minor dents, or small areas of surface rust. All structural components including floor, roof, corner castings, and door frames are intact and functional.
The floor consists of 1.125-inch thick marine-grade plywood treated for moisture resistance. Four ventilation ports with insect screens are installed to reduce condensation buildup. Forklift pockets on the base allow repositioning using appropriate equipment.
This unit is designed for stationary outdoor use on a level, prepared surface.
Technical Specifications
- Container Type: ISO standard, Corten steel, used
- External Length: 20ft
- External Width: 8ft
- External Height: 8ft 6in
- Internal Length: approximately 19ft 4in
- Internal Width: 7ft 8in
- Internal Height: 7ft 9in
- Roller Shutter Door Width: 7ft
- Roller Shutter Door Height: 6ft
- Roller Shutter Door Type: Manual, spring-assisted, vertical operation
- Roller Shutter Locking: Hasp for padlock
- Cargo Door Opening Width: 7ft 5in
- Cargo Door Opening Height: 7ft 3in
- Tare Weight: approximately 5,600 lbs
- Floor Load Capacity: 4,500 lbs per axle
- Steel Gauge: 14-gauge corrugated sidewalls
- Floor Material: 1.125in marine-grade plywood
- Ventilation: 4 ports with insect screens
- Forklift Pockets: 4 (end base locations)
Intended Use
Suitable for on-site equipment storage, material shelter, retail display enclosure, workshop, or construction site storage. Designed for placement on compacted gravel, concrete pad, or level ground. The roller shutter door requires vertical clearance for full operation. Not certified for residential habitation, commercial food storage, or medical use.
Package Includes
- One used 20ft shipping container
- One roller shutter door with locking hasp
- One pair of cargo doors with locking bars
- Four ventilation ports with insect screens
- Treated wood flooring
Reviews
There are no reviews yet.